PTFE Extruded Tube
PTFE Thin Film
PTFE Guide Rails, Rectangular Bar & Wear Strips
PTFE Custom Profiles
PTFE Machined Parts
PTFE Teflon Square Bar
By Item #
Request for Quote
Item # MC5X4
Email This Page
Save To Favorites
Item # MC5X4, Molded Cylinder 5" x 4" x 12"
PTFE and Teflon Molded Cylinders
Fluoro-Plastics compression molds rods and cylinders for machining in a wide range of sizes. The most common sizes are listed in the table below, but many other combinations of OD and ID are available. Molded cylinders are preferred for machining because compression molding yields greater material homogeneity for the finished part.
Most cylinders are molded to 12 inches in length, although other lengths are available.
All cylinders can be etched for bonding.
All cylinders can be made with filled (reinforced) PTFE to enhance the performance parameters of PTFE. Materials available for reinforcement are Glass Fiber, Carbon, Graphite, Bronze, Molybdenum Disulfide, Polyimide, PPS and Stainless Steel.
ASTM D 3294
vir PTFE and reinforced PTFE
ASTM D 3294
Teflon is a registered trademark of Chemours LLC used under license by Fluoro-Plastics. Only Chemours makes Teflon.
• Local PA: 215-425-5500 • Fax: 215-425-5521•