PTFE Extruded Tube
PTFE Thin Film
PTFE Guide Rails, Rectangular Bar & Wear Strips
PTFE Custom Profiles
PTFE Machined Parts
PTFE Teflon Square Bar
By Item #
Request for Quote
Item # R4X12
Email This Page
Save To Favorites
Item # R4X12, Molded PTFE Rod 4" x 12"
PTFE and Teflon Molded Rod
Fluoro-Plastics compression molds rods and cylinders for machining in a wide range of sizes. The most common sizes are listed in the table below, but many other combinations of OD and ID are available. Molded rods are preferred for machining because compression molding yields greater material homogeneity for the finished part.
Most rods are molded to 12 inches in length, although other lengths are available.
All rods can be etched for bonding.
All rods can be made with filled (reinforced) PTFE to enhance the performance parameters of PTFE. Materials available for reinforcement are Glass Fiber, Carbon, Graphite, Bronze, Molybdenum Disulfide, Polyimide, PPS and Stainless Steel.
ASTM D 3294
vir PTFE & Reinforced PTFE
ASTM D 3294
Teflon is a registered trademark of Chemours LLC used under license by Fluoro-Plastics. Only Chemours makes Teflon.
• Local PA: 215-425-5500 • Fax: 215-425-5521•