Fluoro-Plastics, Inc.  Fluoro-Plastics, Inc. 1-800-262-1910
customerservice@Fluoro-Plastics.com
PTFE Sheet PTFE Plate PTFE Rod PTFE Extruded Tube PTFE Thin Film Reinforced PTFE Bondable PTFE PTFE Guide Rails, Rectangular Bar & Wear Strips PTFE Custom Profiles PTFE Machined Parts Modified PTFE PTFE Teflon Square Bar Molded Cylinders Gaskets
Search Catalog
      GO   
 All Categories    THIN FILM TEFLON ® AND PTFE
All Categories > THIN FILM TEFLON ® AND PTFE > THIN FILM TEFLON ® AND PTFE > Item # VS015X36  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # VS015X36, THIN FILM TEFLON ® AND PTFE



Film is available in thicknesses from one mil (.001") up to 20 mils (.020"). Because Fluoro-Plastics uses the most modern skiving technology in the world, interim thicknesses are available; widths from ½" to 60 inches are available in long lengths.

Thin film is a versatile, unsupported hydrophobic membrane with broad chemical compatibility. It is compatible with various sterilizing methods (to 500 deg F, or 234 deg C). For these reasons it is extensively used as a barrier film in many applications.

Thin film is widely used in the wire and cable industry as wrap because of its extraordinary insulating ability. Some specialty PTFE resins can be made into thin film with a breakdown voltage of over 1000 volts per mil.

Thin film meets the performance properties stated in ASTM D 3308.

Teflon® is a registered trademark of E.I. Du Pont De Nemours and Company used under License by Fluoro-Plastics, Inc. Only Dupont makes TEFLON®.






 Specifications   Applications of PTFE & Teflon®    ASTM Specifications   

Product Name

VIRGIN PTFE ROLLS .015" X 36"

Length (ft)

View
1

Thickness

.015"

Width

36"

Length

1 -300 ft per roll

Specification Sheet

AMS 3652 / ASTM D 3308

Material Type

Standard PTFE

Tensile Strength

> 1500 psi

Elongation at Break

200% +/-

Dielectric Strength,i.e. - Breakdown voltage

500 volts per mil


 DOWNLOADS 

TYPICAL PROPERTIES OF PTFE
(JPG, 99KB)

FLUORO-MAR PROPERTIES
(JPG, 63KB)

ASTM D 3308
(PDF, 2915KB)


 
Teflon is a registered trademark of Chemours LLC used under license by Fluoro-Plastics. Only Chemours makes Teflon.
 
Toll Free: 800-262-1910 • Local PA: 215-425-5500 • Fax: 215-425-5521• customerservice@Fluoro-Plastics.com
 
Copyright © Fluoro-Plastics • All Rights Reserved