Fluoro-Plastics, Inc. Fluoro-Plastics, Inc. 1-800-262-1910
customerservice@Fluoro-Plastics.com
PTFE Sheet PTFE Plate PTFE Rod PTFE Extruded Tube PTFE Thin Film Reinforced PTFE Bondable PTFE PTFE Guide Rails, Rectangular Bar & Wear Strips PTFE Custom Profiles PTFE Machined Parts Modified PTFE PTFE Teflon Square Bar Molded Cylinders Gaskets 
Search Catalog
      GO   
 All Categories    PTFE AND TEFLON ® PLATE
All Categories > PTFE AND TEFLON ® PLATE > PTFE AND TEFLON ® PLATE > Compare Items  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Compare Items 
Check one or more items to request information.

PTFE AND TEFLON ® PLATE


Molded plate is available in thicknesses from 3/8ths of an inch up to seven inches. Plate is inventoried in sizes from one-foot square to four feet square (sixteen square feet per sheet). Thickness tolerances range from plus .038" to minus .019" for 3/8th” plate, up to plus .087", minus .043" for one-inch plate. Fluoro-Plastics will build special size molds for production quantities of non-standard dimensional plate. Unless otherwise specified, the edges are not trimmed and all plate is oversized so that blanks can be cut without significant kerf waste. All material is white. Plate is ideal for cutting into bIanks for machining into smaller parts. All material conforms to ASTM D3294 and MIL-P22241.

Teflon® is a registered trademark of E.I. Du Pont De Nemours and Company used under License by Fluoro-Plastics, Inc. Only Dupont makes TEFLON®.

Items
MOLDED

VS3/4X12A
PTFE AND TEFLON ® PLATE
MOLDED

VS3/4X12B
PTFE AND TEFLON ® PLATE
MOLDED

VS3/4X12C
PTFE AND TEFLON ® PLATE
MOLDED

VS3/4X12D
PTFE AND TEFLON ® PLATE
MOLDED

VS3/4X24A
PTFE AND TEFLON ® PLATE
Product Name
MOLDED PTFE 3/4" X 12" X 12" MOLDED PTFE 3/4" X 12" X 24" MOLDED PTFE 3/4" X 12" X 36" MOLDED PTFE 3/4" X 12" X 48" MOLDED PTFE 3/4" X 24" X 24"
Thickness
3/4"
Width
12" 12" 12" 12" 24"
Length
12" 24" 36" 48" 24"
Specification Sheet
AMS 3667 / ASTM D 3294
Material Type
Standard PTFE
Tensile Strength
> 1500 psi
Elongation at Break
200% +/-
Dielectric Strength,i.e. - Breakdown voltage
500 volts per mil
 
Teflon is a registered trademark of Chemours LLC used under license by Fluoro-Plastics. Only Chemours makes Teflon.
 
Toll Free: 800-262-1910 • Local PA: 215-425-5500 • Fax: 215-425-5521• customerservice@Fluoro-Plastics.com
 
Copyright © Fluoro-Plastics • All Rights Reserved