Fluoro-Plastics, Inc. Fluoro-Plastics, Inc. 1-800-262-1910
customerservice@Fluoro-Plastics.com
PTFE Sheet PTFE Plate PTFE Rod PTFE Extruded Tube PTFE Thin Film Reinforced PTFE Bondable PTFE PTFE Guide Rails, Rectangular Bar & Wear Strips PTFE Custom Profiles PTFE Machined Parts Modified PTFE PTFE Teflon Square Bar Molded Cylinders Gaskets 
Search Catalog
      GO   
 All Categories    BONDABLE TEFLON ® AND PTFE
All Categories > BONDABLE TEFLON ® AND PTFE > BONDABLE TEFLON ® AND PTFE > Item # BV1/32X12D  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # BV1/32X12D, BONDABLE TEFLON ® AND PTFE


PTFE can be etched with a sodium ammonia or sodium naphthalene etch so that its surface is chemically modified for adhesion to various substrates using ordinary commercial grade epoxies. When etched for bonding, PTFE can be used as chute liners, vessel linings, and glued to processing surfaces to make a non-stick, low coefficient of friction unit. It is important to use the correct temperature epoxy. The epoxy’s heat resistance must be matched to the application environment. If low temperature epoxy is used in a high temperature application, the epoxy will fail and the PTFE will separate from the substrate. Fluoro-Plastics is one of the few companies in the United States which actually stocks bondable PTFE sheets and rolls in standard thicknesses. Also, Fluoro-Plastics offers etching services on all thicknesses of PTFE. In addition, if you have an application which requires bonding PTFE to a substrate, Fluoro-Plastics has the technical know-how to do the bonding for you. Fluoro-Plastics has successfully bonded 1/16th inch PTFE to steel support rails for use in a steel pickling operation, where the processed steel was bathed in a light sulphuric acid bath to modify its surface; bonding PTFE to the processing rails eliminated damage to the processed steel products and speeded production.

Teflon® is a registered trademark of E.I. Du Pont De Nemours and Company used under License by Fluoro-Plastics, Inc. Only Dupont makes TEFLON®.




 Specifications   Applications of PTFE & Teflon®    ASTM Specifications   

Product Name
BONDABLE PTFE 1/32" X 12" X 48"

Thickness
1/32"

Width
12"

Length
48"

Specification Sheet
AMS 2491D / ASTM D 3308

Material Type
Standard PTFE

Tensile Strength
> 1500 psi

Elongation at Break
200% +/-

Dielectric Strength,i.e. - Breakdown voltage
500 volts per mil


 DOWNLOADS 

TYPICAL PROPERTIES OF PTFE
(JPG, 99KB)


 
Teflon is a registered trademark of Chemours LLC used under license by Fluoro-Plastics. Only Chemours makes Teflon.
 
Toll Free: 800-262-1910 • Local PA: 215-425-5500 • Fax: 215-425-5521• customerservice@Fluoro-Plastics.com
 
Copyright © Fluoro-Plastics • All Rights Reserved