Fluoro-Plastics, Inc. Fluoro-Plastics, Inc. 1-800-262-1910
customerservice@Fluoro-Plastics.com
PTFE Sheet PTFE Plate PTFE Rod PTFE Extruded Tube PTFE Thin Film Reinforced PTFE Bondable PTFE PTFE Guide Rails, Rectangular Bar & Wear Strips PTFE Custom Profiles PTFE Machined Parts Modified PTFE PTFE Teflon Square Bar Molded Cylinders Gaskets 
Search Catalog
      GO   
 All Categories    GLASS-FILLED COMPOUNDED PTFE AND TEFLON ®
All Categories > REINFORCED PTFE & TEFLON® > GLASS-FILLED COMPOUNDED PTFE AND TEFLON ® > Item # GS3/32X12A  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # GS3/32X12A, GLASS FILLED PTFE SHEET 3/32" X 12" X 12"


Various fillers can be added to PTFE to enhance certain characteristics, e.g. Glass fiber (high wear resistance, good electrical, low friction), graphite (low friction, excellent chemical resistance, high creep resistance), carbon fiber (high wear resistance, high load resistance, high bend resistance), glass fiber and Molybdenum Disulfide (high wear resistance, low friction, high creep resistance), Bronze (high wear resistance, heat dissipation). In some industries filled PTFE has become the standard, such as the bearing pad industry, where various percentages of glass fiber are added to the base PTFE resin to create an extremely tough, weatherproof, interface material which can be cut or stamped into configurations to match the dimensions of the opposing surfaces. Fluoro-Plastics has been producing compounded PTFE products and shapes since compounding was invented. Tell us about your application problem and let Fluoro-Plastics' half century of experience work for you. Conforms to ASTM D 4745.

Teflon® is a registered trademark of E.I. Du Pont De Nemours and Company used under License by Fluoro-Plastics, Inc. Only Dupont makes TEFLON®.




 Specifications   

Product Name
GLASS FILLED PTFE SHEET 3/32" X 12" X 12"

Thickness
3/32"

Width
12"

Length
12"

Specification Sheet
ASTM D 4745

Material Type
25% GLASS FILLED PTFE

Tensile Strength
2100 PSI

Elongation at Break
270%


 DOWNLOADS 

ASTM D 4745
(PDF, 4297KB)

Filled Compounds of Teflon PTFE
(PDF, 9807KB)


 
Teflon is a registered trademark of Chemours LLC used under license by Fluoro-Plastics. Only Chemours makes Teflon.
 
Toll Free: 800-262-1910 • Local PA: 215-425-5500 • Fax: 215-425-5521• customerservice@Fluoro-Plastics.com
 
Copyright © Fluoro-Plastics • All Rights Reserved