|
|
|
|
Item # VS3/8X12A, PTFE AND TEFLON ® PLATE
|
|
|
|
|
|
Molded plate is available in thicknesses from 3/8ths of an inch up to four inches. Plate is inventoried in sizes from one-foot square to four feet square (sixteen square feet per sheet). Thickness tolerances range from plus .038" to minus .019" for 3/8th” plate, up to plus .087", minus .043" for one-inch plate. Fluoro-Plastics will build special size molds for production quantities of non-standard dimensional plate. Unless otherwise specified, the edges are not trimmed and all plate is oversized so that blanks can be cut without significant kerf waste. All material is white. Plate is ideal for cutting into bIanks for machining into smaller parts. All material conforms to ASTM D3294 and MIL-P22241.
Teflon® is a registered trademark of E.I. Du Pont De Nemours and Company used under License by Fluoro-Plastics, Inc. Only Dupont makes TEFLON®.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
