BRONZE-FILLED PTFE

• High percentage of bronze powder (40-60%) yields high thermal conductivity and better creep resistance
• Often used in hydraulic systems, particularly superb as linear bearings, e.g. slides, gibs, guide ways
• Not suited for electrical applications
• Bronze is attacked by certain chemicals
• Compare this product to Rulon 142*

SPECIFICATIONS

---

• From 0.030" thick to 0.250" thick
• From 1/2" wide to 8.5" wide
• Available in cylinders up to 8" OD and 12" long (both solid rods and tubes)
• Material Type; reinforcement filler plus PTFE: 40%-60% Bronze powder; 60%-40% PTFE
• Max. PV (psi-fpm); Mpa-m/s: 10,000; 0.35
• Operating Temp.: minus 350 °F - plus 500 °F
• Attribute/Properties: High thermal conductivity; better creep resistance; linear bearing material
• Colors:
  • PTFE can be color coded
  • Available colors are red, orange, green, blue, turquoise, yellow, gray. Other colors may be available on request
  • Pigments do not materially change the properties of PTFE
  • Ideal for applications requiring visible differentiation
  • Pigments can be combined with other fillers
*Rulon is a registered trademark of St. Gobain Performance Plastics

Replace your wearstrips now at a HUGE savings!

• 40% bronze filled PTFE
• Etched one side for bonding to guideways
• Two thicknesses: 0.048" thick and 0.0625" thick
• 048 rolls: 99' long, 062 rolls: 67' long
• Rolls are 12"wide