Fluoro-Plastics, Inc.
3601 G Street, Philadelphia, PA 19134
Toll Free: 800-262-1910 • Telephone: 215-425-5500 • Fax: 215-425-5521
E-Mail: Fluoro@Fluoro-Plastics.com • Website: www.Fluoro-Plastics.com
All Categories > REINFORCED PTFE & TEFLON® > CARBON FIBER-FILLED PTFE  

CARBON FIBER-FILLED PTFE


  • Lower deformation under load
  • Higher compressive and flex modulus and increased hardness
  • Chemically inert–can be used in strong alkali and in HF, where glass reinforced compounds fail
  • Good initial wear and rubbing or sliding characteristics in both dry and water applications
  • Frequently used in piston rings to reduce cylinder wall wear

    SPECIFICATIONS
    • From .010” thick to .250” thick
    • From ½” wide to 48” wide
    • Plate to 1” thick 48 inches square
    • Cylinders to 7” OD and 12” long
    • Rod
    • Material Type; reforcement filler plus PTFE: 5% carbon fiber; 95% PTFE
    • Max. PV (psi-fpm); Mpa-m/s: 10,000; 0.35
    • Operating Temp.: minus 350F - plus 500F
    • Attribute/Properties: Increased hardness, lower deformation under load; can be used in HF and strong alkali where glass filled PTFE fails; less abrasive on mating surface
    •




    Print Back