Fluoro-Plastics, Inc.
3601 G Street, Philadelphia, PA 19134
Toll Free: 800-262-1910 • Telephone: 215-425-5500 • Fax: 215-425-5521
E-Mail: Fluoro@Fluoro-Plastics.com • Website: www.Fluoro-Plastics.com
All Categories > REINFORCED PTFE & TEFLON® > POLYIMIDE-FILLED PTFE  

POLYIMIDE-FILLED PTFE


  • Low Friction
  • Extremely low wear
  • Increased hardness
  • Operates well against soft mating surfaces like aluminum, mild steel, brass and plastics
  • Ideal for stop-start applications to eliminate stick-slip
  • Compare this product to Rulon J* 


SPECIFICATIONS
  • From 0.020" thick to 0.125" thick
  • From 1/2" wide to 12" wide
  • Available in cylinders up to 8" OD and 12" long (solid rods and tubes)
  • Material Type; reinforcement filler plus PTFE: 15% Polyimide and 85% PTFE
  • Max. PV (psi-fpm); Mpa-m/s: 7500; 0.26
  • Operating Temp.: minus 350 °F - plus 500 °F
  • Attribute/Properties: Good friction against soft metals
*Rulon is a registered trademark of St. Gobain Performance Plastics




Print Back