Fluoro-Plastics, Inc. Fluoro-Plastics, Inc. 1-800-262-1910
customerservice@Fluoro-Plastics.com
PTFE Sheet PTFE Plate PTFE Rod PTFE Extruded Tube PTFE Thin Film Reinforced PTFE Bondable PTFE PTFE Guide Rails, Rectangular Bar & Wear Strips PTFE Custom Profiles PTFE Machined Parts Modified PTFE PTFE Teflon Square Bar Molded Cylinders Gaskets 
Search Catalog
      GO   
 All Categories    AMORPHOUS CARBON-FILLED ANTI-STATIC PTFE
All Categories > REINFORCED PTFE & TEFLON® > AMORPHOUS CARBON-FILLED ANTI-STATIC PTFE  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

AMORPHOUS CARBON-FILLED ANTI-STATIC PTFE

  • Anti-Static PTFE - Amorphous Carbon powder additive
  • Increased hardness
  • Increased thermal conductivity
  • Adds to creep resistance
  • Excellent wear properties when combined with graphite; carbon/graphite compounds preferred for non-lubricated piston rings
  • Softer carbon additive lowers tool wear during machining, allowing machining to closer tolerances
  • Carbon containing compounds have some electrical conductivity and are therefore anti-static

    SPECIFICATIONS
    • From .010” thick to .250” thick
    • From ½” wide to 48” wide
    • Plate to 1” thick 48 inches square
    • Cylinders to 7” OD and 12” long
    • Rod
    • Tube
    • Material Type; reforcement filler plus PTFE: 5% amorphous carbon; 95% PTFE
    • Max. PV (psi-fpm); Mpa-m/s: 10,000; 0.35
    • Operating Temp.: minus 350F - plus 500F
    • Attribute/Properties: Anti-static, improved wear, allows machinging to close tolerances
    •


     DOWNLOADS 

    Filled Compounds of Teflon PTFE
    (PDF, 9807KB)

     
    Teflon is a registered trademark of Chemours LLC used under license by Fluoro-Plastics. Only Chemours makes Teflon.
     
    Toll Free: 800-262-1910 • Local PA: 215-425-5500 • Fax: 215-425-5521• customerservice@Fluoro-Plastics.com
     
    Copyright © Fluoro-Plastics • All Rights Reserved