Fluoro-Plastics, Inc.  Fluoro-Plastics, Inc. 1-800-262-1910
customerservice@Fluoro-Plastics.com
PTFE Sheet PTFE Plate PTFE Rod PTFE Extruded Tube PTFE Thin Film Reinforced PTFE Bondable PTFE PTFE Guide Rails, Rectangular Bar & Wear Strips PTFE Custom Profiles PTFE Machined Parts Modified PTFE PTFE Teflon Square Bar Molded Cylinders Gaskets
Search Catalog
      GO   
 All Categories    PTFE AND TEFLON ® PLATE
All Categories > PTFE AND TEFLON ® PLATE > PTFE AND TEFLON ® PLATE > View Items  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

PTFE AND TEFLON ® PLATE

Check up to five results to perform an action.

Molded plate is available in thicknesses from 3/8ths of an inch up to seven inches. Plate is inventoried in sizes from one-foot square to four feet square (sixteen square feet per sheet). Thickness tolerances range from plus .038" to minus .019" for 3/8th” plate, up to plus .087", minus .043" for one-inch plate. Fluoro-Plastics will build special size molds for production quantities of non-standard dimensional plate. Unless otherwise specified, the edges are not trimmed and all plate is oversized so that blanks can be cut without significant kerf waste. All material is white. Plate is ideal for cutting into bIanks for machining into smaller parts. All material conforms to ASTM D3294 and MIL-P22241.

Teflon® is a registered trademark of E.I. Du Pont De Nemours and Company used under License by Fluoro-Plastics, Inc. Only Dupont makes TEFLON®.


Search Items


Compare Items
   
  Results 101 - 107 of 107 1 2 3 4 5 

Item #

Product Name

Thickness

Width

Length

Specification Sheet

Material Type

Tensile Strength

Elongation at Break

Dielectric Strength,i.e. - Breakdown voltage

VS3X24A MOLDED PTFE 3" X 24" X 24" 3" 24" 24" AMS 3667 / ASTM D 3294 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
VS4X12A MOLDED PTFE 4" X 12" X 12" 4" 12" 12" AMS 3667 / ASTM D 3294 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
VS4X24A MOLDED PTFE 4" X 24" X 24" 4" 24" 24" AMS 3667 / ASTM D 3294 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
VS5X12A MOLDED PTFE 5" X 12" X 12" 5" 12" 12" AMS 3667 / ASTM D 3294 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
VS5X24A MOLDED PTFE 5" X 24" X 24" 5" 24" 24" AMS 3667 / ASTM D 3294 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
VS6X12A MOLDED PTFE 6" X 12" X 12" 6" 12" 12" AMS 3667 / ASTM D 3294 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
VS6X24A MOLDED PTFE 6" X 24" X 24" 6" 24" 24" AMS 3667 / ASTM D 3294 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
  Results 101 - 107 of 107 1 2 3 4 5 
 
Teflon is a registered trademark of Chemours LLC used under license by Fluoro-Plastics. Only Chemours makes Teflon.
 
Toll Free: 800-262-1910 • Local PA: 215-425-5500 • Fax: 215-425-5521• customerservice@Fluoro-Plastics.com
 
Copyright © Fluoro-Plastics • All Rights Reserved