Fluoro-Plastics, Inc.  Fluoro-Plastics, Inc. 1-800-262-1910
customerservice@Fluoro-Plastics.com
PTFE Sheet PTFE Plate PTFE Rod PTFE Extruded Tube PTFE Thin Film Reinforced PTFE Bondable PTFE PTFE Guide Rails, Rectangular Bar & Wear Strips PTFE Custom Profiles PTFE Machined Parts Modified PTFE PTFE Teflon Square Bar Molded Cylinders Gaskets
Search Catalog
      GO   
 All Categories    PTFE AND TEFLON ® SQUARE BAR
All Categories > PTFE AND TEFLON ® SQUARE BAR > PTFE AND TEFLON ® SQUARE BAR > Item # SQB1/2  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # SQB1/2, PTFE AND TEFLON ® SQUARE BAR



Fluoro-Plastics offers virgin PTFE square bar in 1/8th inch up to one-inch square sizes (see the grid for intermediate sizes). Bars come in ten-foot lengths standard and will be cut to five feet for UPS shipment if requested. Tolerances for 1/8th inch to 3/8ths inch are +.032/-.000. Tolerance on ½ inch square to one inch square is +.060/-.000. Square bar easily fits into compatible grooves, slots, and ways without additional machining. Smaller sizes will bend (within limits) to conform to bends in the fitting groove or slot. Made of unfilled virgin PTFE square bar is inert, frictionless, and non-reactive and works in applications from -350F to +500F. Different lengths are available on special order.




 Specifications   

Product Name

1/2 Sq Bar

DIAMETER

.500"

Length

6' & 12'

Specification Sheet

ASTM 1710

Material Type

Virgin PTFE

Tensile Strength

>1500psi

Elongation at Break

200%

Dielectric Strength,i.e. - Breakdown voltage

500v/mil


 
Teflon is a registered trademark of Chemours LLC used under license by Fluoro-Plastics. Only Chemours makes Teflon.
 
Toll Free: 800-262-1910 • Local PA: 215-425-5500 • Fax: 215-425-5521• customerservice@Fluoro-Plastics.com
 
Copyright © Fluoro-Plastics • All Rights Reserved