Fluoro-Plastics, Inc.  Fluoro-Plastics, Inc. 1-800-262-1910
customerservice@Fluoro-Plastics.com
PTFE Sheet PTFE Plate PTFE Rod PTFE Extruded Tube PTFE Thin Film Reinforced PTFE Bondable PTFE PTFE Guide Rails, Rectangular Bar & Wear Strips PTFE Custom Profiles PTFE Machined Parts Modified PTFE PTFE Gaskets Glass-Filled PTFE Gaskets PTFE Washers Glass-Filled PTFE Washers PTFE Molded Rods PTFE Molded Cylinders PTFE Teflon Square Bar

9001:2008

9001:2008
Search Catalog
      GO   
 All Categories    BONDABLE TEFLON ® AND PTFE
View Cart View RFQs
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Categories > BONDABLE TEFLON ® AND PTFE > BONDABLE TEFLON ® AND PTFE > View Items  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

BONDABLE TEFLON ® AND PTFE

Check up to five results to perform an action.

PTFE can be etched with a sodium ammonia or sodium naphthalene etch so that its surface is chemically modified for adhesion to various substrates using ordinary commercial grade epoxies. When etched for bonding, PTFE can be used as chute liners, vessel linings, and glued to processing surfaces to make a non-stick, low coefficient of friction unit. It is important to use the correct temperature epoxy. The epoxy’s heat resistance must be matched to the application environment. If low temperature epoxy is used in a high temperature application, the epoxy will fail and the PTFE will separate from the substrate. Fluoro-Plastics is one of the few companies in the United States which actually stocks bondable PTFE sheets and rolls in standard thicknesses. Also, Fluoro-Plastics offers etching services on all thicknesses of PTFE. In addition, if you have an application which requires bonding PTFE to a substrate, Fluoro-Plastics has the technical know-how to do the bonding for you. Fluoro-Plastics has successfully bonded 1/16th inch PTFE to steel support rails for use in a steel pickling operation, where the processed steel was bathed in a light sulphuric acid bath to modify its surface; bonding PTFE to the processing rails eliminated damage to the processed steel products and speeded production.

Teflon® is a registered trademark of E.I. Du Pont De Nemours and Company used under License by Fluoro-Plastics, Inc. Only Dupont makes TEFLON®.


Search Items


Compare Items Add To Cart Request Quote
   
  Results 26 - 48 of 48 1 2 

Item #

Product Name

Thickness

Width

Length

Specification Sheet

Material Type

Tensile Strength

Elongation at Break

Dielectric Strength,i.e. - Breakdown voltage

BV1/4X48A BONDABLE PTFE 1/4" X 48" X 48" 1/4" 48" 48" AMS 2491D / ASTM D 3308 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
BV1/8X12A BONDABLE PTFE 1/8" X 12" X 12" 1/8" 12" 12" AMS 2491D / ASTM D 3308 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
BV1/8X12B BONDABLE PTFE 1/8" X 12" X 24" 1/8" 12" 24" AMS 2491D / ASTM D 3308 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
BV1/8X12C BONDABLE PTFE 1/8" X 12" X 36" 1/8" 12" 36" AMS 2491D / ASTM D 3308 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
BV1/8X12D BONDABLE PTFE 1/8" X 12" X 48" 1/8" 12" 48" AMS 2491D / ASTM D 3308 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
BV1/8X24A BONDABLE PTFE 1/8" X 24" X 24" 1/8" 24" 24" AMS 2491D / ASTM D 3308 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
BV1/8X24C BONDABLE PTFE 1/8" X 24" X 48" 1/8" 24" 48" AMS 2491D / ASTM D 3308 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
BV1/8X36A BONDABLE PTFE 1/8" X 36" X 36" 1/8" 36" 36" AMS 2491D / ASTM D 3308 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
BV1/8X48A BONDABLE PTFE 1/8" X 48" X 48" 1/8" 48" 48" AMS 2491D / ASTM D 3308 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
BV3/16X12A BONDABLE PTFE 3/16" X 12" X 12" 3/16" 12" 12" AMS 2491D / ASTM D 3308 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
BV3/16X12B BONDABLE PTFE 3/16" X 12" X 24" 3/16" 12" 24" AMS 2491D / ASTM D 3308 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
BV3/16X12C BONDABLE PTFE 3/16" X 12" X 36" 3/16" 12" 36" AMS 2491D / ASTM D 3308 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
BV3/16X24A BONDABLE PTFE 3/16" X 24" X 24" 3/16" 24" 24" AMS 2491D / ASTM D 3308 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
BV3/16X24C BONDABLE PTFE 3/16" X 24" X 48" 3/16" 24" 48" AMS 2491D / ASTM D 3308 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
BV3/16X36A BONDABLE PTFE 3/16" X 36" X 36" 3/16" 36" 36" AMS 2491D / ASTM D 3308 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
BV3/16X48A BONDABLE PTFE 3/16" X 48" X 48" 3/16" 48" 48" AMS 2491D / ASTM D 3308 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
BV3/32X12A BONDABLE PTFE 3/32" X 12" X 12" 3/32" 12" 12" AMS 2491D / ASTM D 3308 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
BV3/32X12B BONDABLE PTFE 3/32" X 12" X 24" 3/32" 12" 24" AMS 2491D / ASTM D 3308 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
BV3/32X12C BONDABLE PTFE 3/32" X 12" X 36" 3/32" 12" 36" AMS 2491D / ASTM D 3308 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
BV3/32X24A BONDABLE PTFE 3/32" X 24" X 24" 3/32" 24" 24" AMS 2491D / ASTM D 3308 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
BV3/32X24B BONDABLE PTFE 3/32" X 24" X 36" 3/32" 24" 36" AMS 2491D / ASTM D 3308 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
BV3/32X36A BONDABLE PTFE 3/32" X 36" X 36" 3/32" 36" 36" AMS 2491D / ASTM D 3308 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
BV3/32X48A BONDABLE PTFE 3/32" X 48" X 48" 3/32" 48" 48" AMS 2491D / ASTM D 3308 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
  Results 26 - 48 of 48 1 2 
 
Teflon® is a registered trademark of The Chemours Company FC LLC used under license by Fluoro-Plastics, Inc.
 
Toll Free: 800-262-1910 • Local PA: 215-425-5500 • Fax: 215-425-5521• customerservice@Fluoro-Plastics.com
 
Copyright © Fluoro-Plastics • All Rights Reserved