Fluoro-Plastics, Inc.  Fluoro-Plastics, Inc. 1-800-262-1910
customerservice@Fluoro-Plastics.com
PTFE Sheet PTFE Plate PTFE Rod PTFE Extruded Tube PTFE Thin Film Reinforced PTFE Bondable PTFE PTFE Guide Rails, Rectangular Bar & Wear Strips PTFE Custom Profiles PTFE Machined Parts Modified PTFE PTFE Teflon Square Bar Molded Cylinders Gaskets
Search Catalog
      GO   
 All Categories    PTFE AND TEFLON ® SHEET
All Categories > PTFE AND TEFLON ® SHEET > PTFE AND TEFLON ® SHEET > View Items  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

PTFE AND TEFLON ® SHEET

Check up to five results to perform an action.

Skived sheet can be made in any thickness from 15 mils up to .250 inches. Fluoro-Plastics technology makes it possible to make in-between sizes. Thickness tolerances range from .0005 for sizes from .002" thick to .005" thick up to .003" tolerance for material that is over .060" thick. Skived sheet is ideal as a slide surface, for chute liners, other kinds of liners, or for cutting or stamping into gaskets (asbestos substitute) and diaphragms, including complex stamped gasket configurations. It comes in sheets from 60 inches by 60 inches square to rolls 60 inches wide. Standard sizes are 48 inches square, twelve inches square, twenty-four inches square, thirty-six inches square, and rolls one, two, three and four feet wide are available for clicker press fabricators. Material may be ordered in long lengths as individual sheets. The material can be wound on a three inch cardboard or PVC core: All interim thickness sizes are available on special order, and rolls may be silt to interim widths. All material conforms to ASTM D3308. Material is white. The material may be ordered etched for bonding on one or both sides for an additional charge (both Sodium Ammonia and Sodium Naphthalene etching are offered).

Teflon® is a registered trademark of E.I. Du Pont De Nemours and Company used under License by Fluoro-Plastics, Inc. Only Dupont makes TEFLON®.


Search Items


Compare Items
   
  Results 1 - 25 of 60 1 2 3 

Item #

Product Name

Thickness

Width

Length

Specification Sheet

Material Type

Tensile Strength

Elongation at Break

Dielectric Strength,i.e. - Breakdown voltage

VS3/32X12A SKIVED PTFE 3/32" X 12" X 12" 3/32" 12" 12" AMS 3652 / MIL-P-22241 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
VS3/32X12B SKIVED PTFE 3/32" X 12" X 24" 3/32" 12" 24" AMS 3652 / MIL-P-22241 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
VS3/32X12C SKIVED PTFE 3/32" X 12" X 36" 3/32" 12" 36" AMS 3652 / MIL-P-22241 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
VS3//32X12D SKIVED PTFE 3/32" X 12" X 48" 3/32" 12" 48" AMS 3652 / MIL-P-22241 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
VS3/32X24A SKIVED PTFE 3/32" X 24" X 24" 3/32" 24" 24" AMS 3652 / MIL-P-22241 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
VS3/32X24B SKIVED PTFE 3/32" X 24" X 36" 3/32" 24" 36" AMS 3652 / MIL-P-22241 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
VS3/32X24C SKIVED PTFE 3/32" X 24" X 48" 3/32" 24" 48" AMS 3652 / MIL-P-22241 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
VS3/32X36A SKIVED PTFE 3/32" X 36" X 36" 3/32" 36" 36" AMS 3652 / MIL-P-22241 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
VS3/32X36B SKIVED PTFE 3/32" X 36" X 48" 3/32" 36" 48" AMS 3652 / MIL-P-22241 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
VS3/32X48A SKIVED PTFE 3/32" X 48" X 48" 3/32" 48" 48" AMS 3652 / MIL-P-22241 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
VS1/16X12A SKIVED PTFE 1/16" X 12" X 12" 1/16" 12" 12" AMS 3652 / MIL-P-22241 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
VS1/16X12B SKIVED PTFE 1/16" X 12" X 24" 1/16" 12" 24" AMS 3652 / MIL-P-22241 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
VS1/16X12C SKIVED PTFE 1/16" X 12" X 36" 1/16" 12" 36" AMS 3652 / MIL-P-22241 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
VS1/16X12D SKIVED PTFE 1/16" X 12" X 48" 1/16" 12" 48" AMS 3652 / MIL-P-22241 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
VS1/16X24A SKIVED PTFE 1/16" X 24" X 24" 1/16" 24" 24" AMS 3652 / MIL-P-22241 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
VS1/16X24B SKIVED PTFE 1/16" X 24" X 36" 1/16" 24" 36" AMS 3652 / MIL-P-22241 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
VS1/16X24C SKIVED PTFE 1/16" X 24" X 48" 1/16" 24" 48" AMS 3652 / MIL-P-22241 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
VS1/16X36A SKIVED PTFE 1/16" X 36" X 36" 1/16" 36" 36" AMS 3652 / MIL-P-22241 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
VS1/16X36B SKIVED PTFE 1/16" X 36" X 48" 1/16" 36" 48" AMS 3652 / MIL-P-22241 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
VS1/16X48A SKIVED PTFE 1/16" X 48" X 48" 1/16" 48" 48" AMS 3652 / MIL-P-22241 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
VS1/32X12A SKIVED PTFE 1/32" X 12" X 12" 1/32" 12" 12" AMS 3652 / MIL-P-22241 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
VS1/32X12B SKIVED PTFE 1/32" X 12" X 24" 1/32" 12" 24" AMS 3652 / MIL-P-22241 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
VS1/32X12C SKIVED PTFE 1/32" X 12" X 36" 1/32" 12" 36" AMS 3652 / MIL-P-22241 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
VS1/32X12D SKIVED PTFE 1/32" X 12" X 48" 1/32" 12" 48" AMS 3652 / MIL-P-22241 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
VS1/32X24A SKIVED PTFE 1/32" X 24" X 24" 1/32" 24" 24" AMS 3652 / MIL-P-22241 Standard PTFE > 1500 psi 200% +/- 500 volts per mil
  Results 1 - 25 of 60 1 2 3 
 
Teflon is a registered trademark of Chemours LLC used under license by Fluoro-Plastics. Only Chemours makes Teflon.
 
Toll Free: 800-262-1910 • Local PA: 215-425-5500 • Fax: 215-425-5521• customerservice@Fluoro-Plastics.com
 
Copyright © Fluoro-Plastics • All Rights Reserved