Fluoro-Plastics, Inc. Fluoro-Plastics, Inc. 1-800-262-1910
customerservice@Fluoro-Plastics.com
PTFE Sheet PTFE Plate PTFE Rod PTFE Extruded Tube PTFE Thin Film Reinforced PTFE Bondable PTFE PTFE Guide Rails, Rectangular Bar & Wear Strips PTFE Custom Profiles PTFE Machined Parts Modified PTFE PTFE Teflon Square Bar Molded Cylinders Gaskets 
Search Catalog
      GO   
 All Categories    GLASS-MOLY-FILLED PTFE
All Categories > REINFORCED PTFE & TEFLON® > GLASS-MOLY-FILLED PTFE  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

GLASS-MOLY-FILLED PTFE

  • Adds to hardness and stiffness
  • Reduces friction, especially starting coefficient of friction and steady-state wear
  • Effect on electrical properties is negligible
  • Unreactive chemically, and dissolves only in strong oxidizing acids


SPECIFICATIONS
  • From 0.010" thick to 0.250" thick
  • From 1/2" wide to 12" wide
  • Plate to 2.5" thick 48 inches square
  • Cylinders up to 8" OD and 12" long (both solid rods and tubes)
  • Material Type; reinforcement filler plus PTFE: 10-15% Glass fiber; 5% Molybdenum DiSulfide and 80-85% PTFE
  • Max. PV (psi-fpm); Mpa-m/s: 10,000; 0.35
  • Operating Temp.: minus 350 °F - plus 500 °F
  • Attribute/Properties: Very hard and stiff; reduces friction; little effect on electrical properties; unreactive chemically


 DOWNLOADS 

Filled Compounds of Teflon PTFE
(PDF, 9807KB)

 
Teflon is a registered trademark of Chemours LLC used under license by Fluoro-Plastics. Only Chemours makes Teflon.
 
Toll Free: 800-262-1910 • Local PA: 215-425-5500 • Fax: 215-425-5521• customerservice@Fluoro-Plastics.com
 
Copyright © Fluoro-Plastics • All Rights Reserved