Fluoro-Plastics, Inc. Fluoro-Plastics, Inc. 1-800-262-1910
customerservice@Fluoro-Plastics.com
PTFE Sheet PTFE Plate PTFE Rod PTFE Extruded Tube PTFE Thin Film Reinforced PTFE Bondable PTFE PTFE Guide Rails, Rectangular Bar & Wear Strips PTFE Custom Profiles PTFE Machined Parts Modified PTFE PTFE Teflon Square Bar Molded Cylinders Gaskets 
Search Catalog
      GO   
 All Categories    POLYIMIDE-FILLED PTFE
All Categories > REINFORCED PTFE & TEFLON® > POLYIMIDE-FILLED PTFE  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

POLYIMIDE-FILLED PTFE

  • Low Friction
  • Extremely low wear
  • Increased hardness
  • Operates well against soft mating surfaces like aluminum, mild steel, brass and plastics
  • Ideal for stop-start applications to eliminate stick-slip
  • Compare this product to Rulon J* 


SPECIFICATIONS
  • From 0.020" thick to 0.125" thick
  • From 1/2" wide to 12" wide
  • Available in cylinders up to 8" OD and 12" long (solid rods and tubes)
  • Material Type; reinforcement filler plus PTFE: 15% Polyimide and 85% PTFE
  • Max. PV (psi-fpm); Mpa-m/s: 7500; 0.26
  • Operating Temp.: minus 350 °F - plus 500 °F
  • Attribute/Properties: Good friction against soft metals
*Rulon is a registered trademark of St. Gobain Performance Plastics


 DOWNLOADS 

Filled Compounds of Teflon PTFE
(PDF, 9807KB)

 
Teflon is a registered trademark of Chemours LLC used under license by Fluoro-Plastics. Only Chemours makes Teflon.
 
Toll Free: 800-262-1910 • Local PA: 215-425-5500 • Fax: 215-425-5521• customerservice@Fluoro-Plastics.com
 
Copyright © Fluoro-Plastics • All Rights Reserved