Fluoro-Plastics, Inc.  Fluoro-Plastics, Inc. 1-800-262-1910
customerservice@Fluoro-Plastics.com
PTFE Sheet PTFE Plate PTFE Rod PTFE Extruded Tube PTFE Thin Film Reinforced PTFE Bondable PTFE PTFE Guide Rails, Rectangular Bar & Wear Strips PTFE Custom Profiles PTFE Machined Parts Modified PTFE PTFE Gaskets Glass-Filled PTFE Gaskets PTFE Washers Glass-Filled PTFE Washers PTFE Molded Rods PTFE Molded Cylinders PTFE Teflon Square Bar
Search Catalog
      GO   
 All Categories    PTFE & Teflon Molded Cylinders
View Cart View RFQs
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Categories > PTFE & Teflon Molded Cylinders > PTFE & Teflon Molded Cylinders > View Items  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

PTFE & Teflon Molded Cylinders

Check up to five results to perform an action.

PTFE and Teflon Molded Cylinders

Fluoro-Plastics compression molds rods and cylinders for machining in a wide range of sizes. The most common sizes are listed in the table below, but many other combinations of OD and ID are available. Molded cylinders are preferred for machining because compression molding yields greater material homogeneity for the finished part.

Most cylinders are molded to 12 inches in length, although other lengths are available.

All cylinders can be etched for bonding.

All cylinders can be made with filled (reinforced) PTFE to enhance the performance parameters of PTFE. Materials available for reinforcement are Glass Fiber, Carbon, Graphite, Bronze, Molybdenum Disulfide, Polyimide, PPS, and Stainless Steel.




Compare Items Add To Cart Request Quote
   
  Results 1 - 10 of 10 1 

Item #

Item Name

Specification Sheet

Material Type

MC5X4 Molded Cylinder 5" x 4" x 12" ASTM D 3294 vir PTFE and reinforced PTFE
MC6X5 Molded Cylinder 6" x 5" x 12" ASTM D 3294 vir PTFE and reinforced PTFE
MC7X5 Molded Cylinder 7" x 5" x 12" ASTM D 3294 vir PTFE and reinforced PTFE
MC725X5 Molded Cylinder 7.25" x 5" x 12" ASTM D 3294 vir PTFE and reinforced PTFE
MC75x25 Molded Cylinder 7.5" x 2.5" x 12" ASTM D 3294 vir PTFE and reinforced PTFE
MC7X3 Molded Cylinder 7" x 3" x 12" ASTM D 3294 vir PTFE and reinforced PTFE
MC75X525 Molded Cylinder 7.5" x 5.25" x 12" ASTM D 3294 vir PTFE and reinforced PTFE
MC8X3 Molded Cylinder 8" x 3" x 12" ASTM D 3294 vir PTFE and reinforced PTFE
MC8X5 Molded Cylinder 8" x 5" x 12" ASTM D 3294 vir PTFE and reinforced PTFE
MC10X3 Molded Cylinder 10" x 3" x 12" ASTM D 3294 vir PTFE and reinforced PTFE
  Results 1 - 10 of 10 1 
 
Teflon® is a registered trademark of The Chemours Company FC LLC used under license by Fluoro-Plastics, Inc.
 
Toll Free: 800-262-1910 • Local PA: 215-425-5500 • Fax: 215-425-5521• customerservice@Fluoro-Plastics.com
 
Copyright © Fluoro-Plastics • All Rights Reserved